S1 Overview & Applicable Scenarios
The Indoor Human Posture Detector (model IHMR-STG-HP) uses mmWave radar for non-contact indoor sensing — no camera. Suitable for bedrooms, living rooms, senior care, hotels, and similar indoor spaces.
Key capabilities
| Capability | Description |
|---|---|
| Behavior recognition | 9 types: stand, walk, run, sit, squat, stand-up, lie, wave, fall |
| Posture | 17-keypoint skeleton + continuous trajectory |
| Alerts | Real-time fall and other events |
| Privacy | Non-imaging; no camera |
| Multi-target | Up to about 6 people tracked in zone |
| All environments | Works in darkness, smoke, etc. |
Extended features (config/platform): voice intercom, geofencing, playback, AI behavior reports — see the User Setup Guide (separate site).
Ten chapters — scope (read first)
Each chapter covers one layer only. Install in order S2 → S4; confirm S7 + S8 before S4 (before fixing the wall plate).
| Ch. | Answers | Does not cover |
|---|---|---|
| S1 Overview | What the product is; how to read this guide | Procedures |
| S2 Know device | Unbox, ports, detection zone, first power-on | Placement, environment, faults |
| S3 Placement | Wall, height, tilt, bedroom rules, wrong-install examples | Room layouts, scenario differences |
| S4 Wall mount | Fix plate, hang unit, power, post-mount checks | Calibration, environment theory |
| S5 Calibration | When/how to walk, when to turn off | Placement, environment |
| S6 Environment & usage | Universal environment rules, post-install constraints, product behavior limits | Room-type mounts, scenario deployment |
| S7 Room types | Space shape → mount point, orientation, unit count | Scenarios, alert mechanics |
| S8 Scenarios | Usage scenario (fall, bed rest, multi-person…) → coverage priority & expectations | Environment theory, room layouts, troubleshooting |
| S9 Acceptance | Post-install checklist | Theory |
| S10 FAQ | Symptom troubleshooting | Preventive rules (see S3/S6) |
Install flow
- S2 Know device — Unbox, ports, detection zone
- S3 Placement — Wall, height, angle, avoid reflectors
- S7 Room types, S8 Scenarios — Confirm coverage by layout & scenario (before mount)
- S4 Wall mount — Fix plate → hang → power
- S5 Calibration — Walk calibration (if needed)
- S6 Environment & usage — Universal constraints & behavior limits
- S9 Acceptance — On-site checklist
If something goes wrong, see S10 FAQ.
Provisioning and platform ops — User Setup Guide (separate site).